(Large Range)

Main casing (Bearing structure) made of extremely thick steel-sheet, resistant to rust, corrosion, chemical agents, solvents, aliphatics and alcohols.

Self-supporting and removable panels provided with holes (buttonholes) for ceiling/wall mounting directly through the main casing.

Pre-cuts slots and prearranged holes to configure the unit on request, to install the accessories, to output for the water connections on the left or right, to reverse the unit even on-site.

Assembled with self-threading screws for fast, total and easy check/maintenance. Reduced sizes, optimised volumes.

Available in a very large range of horizontal and vertical versions.

 

Available main casings:

Z : Single skin panel made of galvanized steel + internal thermal-acoustic insulation (class M1) of all parts in contact with the coil for all TK -CS/CA models.

P : Single skin panel made of pre-painted steel white RAL9002 colour + internal thermo-acoustic insulation (class M1) of the parts in contact with the coil for TK - VA/HA models.

 

Back to : KT Standard Fan Coil Units

KT Cabinet

Beautiful, modern styled cabinet well proportioned smoothed outline to perfectly match with any interior. Standard white colour (similar to RAL 9010), or any other RAL colour on request (additional charge).

 Read more...

Drain Pan - Bearing Structure

Drain pan provided with condensation drain and thermal insulation (class M1).
Only for vertical versions: Condensation Drain Funnel with  20 mm pipe, realised in plastic material (standard supplied in the same side of the water connections) terminating externally to the unit side, for an easy and fast connection to the condensation drain pipe.

Read more...

KT Heat Exchanger

Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil connections provided with anti-torsion system, manual air vent valves, manual water drain valves. Standard connections on the left side; on request (no additional charge) connections on the right side, anyway can be easily reversed even on working site.

Read more...

Fan Section - Air Filters

Fan section including 1, 2 or 3 centrifugal fans with double air inlet

Last Generation Plastic Blades (forward curved fins) directly coupled to the electric motor. Mounted on elastic and anti-vibration supports. Fan section statically and dynamically balanced.

Read more...

Main Casing

Main casing ( Bearing structure) made of extremely thick steel-sheet, resistant to rust, corrosion, chemical agents, solvents, aliphatics and alcohols.

Self-supporting and removable panels provided with holes (buttonholes) for ceiling/wall

Read more...

Electrical Equipment

The standard unit is supplied equipped only with the motor cable (without control panel) terminal.

In this way, the client can choose among a large range of control panels “CB”-“CBE” and terminal boards “MRS”

Read more...