Fan section

FcuFanSectFan section including 1, 2 or 3 centrifugal fans with double air inlet

Last Generation Plastic Blades (forward curved fins) directly coupled to the electric motor. Mounted on elastic and anti-vibration supports. Fan section statically and dynamically balanced.

Extensive diameter fans (= high air flow and high static pressure) with low revolutions (= low noise level).

Asynchronous electric motor provided with heat protection (Klixon), running capacitor permanently switched on, IP 42, Class B, electric cables protected by double insulation.

Manufactured according with international standards, 230Vac–1Ph–50Hz.

Fan section easy to remove (fixed by just 4 screws).

  • Standard unit (KT10/.../100) provided with single-speed motor + Autotransformer with 6 outputs in order to have 6 equal-distance speed (with performances changing from max=100% up to min = about 50%). Autotransformer is installed externally, on the unit side, to enable easy maintenance operations.
  • This technology warrantee a big flexibility, with possible connections according with the specific end-user needs, higher or lower speeds choices between the 6 available.
  • Factory standard pre-connected speed are no. 2-3-5 (with 1=max and 6=min). On request (no additional charge), any speed can be required.
  • Potentiate units (KT90P/…/120P) with motor with 5 or 6 speed obtained directly on the motor (compulsory technology to have potentiate motors, suitable for ductable units, with the correct price/performances rating). The speed obtained directly from the motor are closer to each other in comparison to technology with auto-transformer.

 

Air Filter

FcufilterAir filter easy to remove, made of a metal frame holding filtering section. Can be regenerated by water wash, blowing, suction.
Standard: Filtering media made of acrylic polyester fabric, being resin treated, highly efficient. Superlative against Powders and Pollens.
Class M1; Filtering level EU3 (EUROVENT 4/5).

 

 

Back to : KT Standard Fan Coil Units

KT Cabinet

Beautiful, modern styled cabinet well proportioned smoothed outline to perfectly match with any interior. Standard white colour (similar to RAL 9010), or any other RAL colour on request (additional charge).

 Read more...

Drain Pan - Bearing Structure

Drain pan provided with condensation drain and thermal insulation (class M1).
Only for vertical versions: Condensation Drain Funnel with  20 mm pipe, realised in plastic material (standard supplied in the same side of the water connections) terminating externally to the unit side, for an easy and fast connection to the condensation drain pipe.

Read more...

KT Heat Exchanger

Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil connections provided with anti-torsion system, manual air vent valves, manual water drain valves. Standard connections on the left side; on request (no additional charge) connections on the right side, anyway can be easily reversed even on working site.

Read more...

Fan Section - Air Filters

Fan section including 1, 2 or 3 centrifugal fans with double air inlet

Last Generation Plastic Blades (forward curved fins) directly coupled to the electric motor. Mounted on elastic and anti-vibration supports. Fan section statically and dynamically balanced.

Read more...

Main Casing

Main casing ( Bearing structure) made of extremely thick steel-sheet, resistant to rust, corrosion, chemical agents, solvents, aliphatics and alcohols.

Self-supporting and removable panels provided with holes (buttonholes) for ceiling/wall

Read more...

Electrical Equipment

The standard unit is supplied equipped only with the motor cable (without control panel) terminal.

In this way, the client can choose among a large range of control panels “CB”-“CBE” and terminal boards “MRS”

Read more...