Water coil installed inside a Box made according with the specifications (self-supporting panels with SST technology).
Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil without air vent valves. Coils tested at 30 Bar pressure, suitable to work with water at max 15 Bar pressure.
Standard connections on the right side; on request (no additional charge) connections on the left side, anyway can be easily reversed even on working site.
Coils are suitable to work with hot water (boiler), low temperature water (condensing boilers, solar panels, heat pumps, etc…), overheat water (industrial processes and/or overheat water thermal groups) chilled water (chillers and/or industrial processes), glycol added water. 2pipe (3R, 6R) 4pipe (3R+2R)
Are standard available:
- coils are suitable for 2-pipe systems (3R, 6R) and 4-pipe systems (3R+2R) 3 rows for cooling, 2 rows for heating
- 3 rows, usually used for cooling, with all recirculation air
- 6 rows coils usually used for cooling, with total external (or even partial) renewal air, in case it is required high dehumidification, also suitable for district cooling applications, with high water ΔT.
- (3R+2R), 3 rows for cooling and 2 rows for heating.
- Klimallco
- Products
- Terminal Units
- KDA Double Skin Large Fan Coil Units
- Products
- Terminal Units
- KDA_components
- KDA - Section with Water Coil
KDA Main Casing
Bearing structure (= Main casing) made of extremely thick steel-sheet resistant to rust, corrosion, chemical agents, solvents, aliphatics and alcohols. Self-supporting and removable panels ; assembled with screws for fast and easy checking/maintenance. Available a very large range of versions
KDA Section with Water Coil
Water coil installed inside a Box made according with the specifications (self-supporting panels with SST technology).
Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil without air vent valves. Coils tested at 30 Bar pressure, suitable to work with water at max 15 Bar pressure.
KDA Fan Section
Centrifugal fan installed inside a Box made according with the specifications (self-supporting panels with SST technology).
Fan section including 1 or 2 centrifugal fans with double air inlet aluminium blades (forward curved fins) directly coupled to the 1 or 2 electric motor.
KDA - Drain Pan
The sections with cooling coil are equipped with single inclination drain pan for optimised condensate drainage, provided with 30mm drainpipe (standard on the same side of coil connections). Standard drain pan made of galvanized steel + external heat insulation (class M1). On request drain pan made of stainless steel AISI304.
