Water coil installed inside a Box made according with the specifications (self-supporting panels with SST technology).
Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil without air vent valves. Coils tested at 30 Bar pressure, suitable to work with water at max 15 Bar pressure.
Standard connections on the right side; on request (no additional charge) connections on the left side, anyway can be easily reversed even on working site.
Coils are suitable to work with hot water (boiler), low temperature water (condensing boilers, solar panels, heat pumps, etc…), overheat water (industrial processes and/or overheat water thermal groups) chilled water (chillers and/or industrial processes), glycol added water. 2pipe (3R, 6R) 4pipe (3R+2R)
Are standard available:
- coils are suitable for 2-pipe systems (3R, 6R) and 4-pipe systems (3R+2R) 3 rows for cooling, 2 rows for heating
- 3 rows, usually used for cooling, with all recirculation air
- 6 rows coils usually used for cooling, with total external (or even partial) renewal air, in case it is required high dehumidification, also suitable for district cooling applications, with high water ΔT.
- (3R+2R), 3 rows for cooling and 2 rows for heating.
- Klimallco
- Products
- Chillers
- Air Cooled Water Chillers
- MKAC 39,7-168,2 kW R410a
- Products
- Terminal Units
- KDA_components
- KDA - Section with Water Coil
MKAC - Compressor
All units use low-noise, maintenance free, Hermetic Scroll compressor with low vibration levels, specially optimized for use with R410a refrigerant, selected from world class suppliers. They are equipped with a crankcase electrical heater for the oil, and are internally protected against potential overloading or electrical spikes. The compressors are mounted on special antivibration rubber mounts to eliminate vibration from the unit’s.
MKAC - Hydraulic kit
This versionis equipped with hydraulic kit. It includes : one or two pumps (one as stand-by), expansion vessel, gauses, flow switch, safety valve, air purger, shut off valve and hydraulic circuit insulated. In case of stand-by pump non-return valves are mounted. Relevant electrical circuit. As option, pumps with higher ESP are available.
MKAC - Axial Condenser Fans
All unit fans are of the axial type made of Al/Mg, directly coupled to a three phase electric motor with external rotor, 6 poles, internally protected against potential overheating, silent and suitable for outdoor installation. Due to the sophisticated aerodynamic design of the blades and inlet cones, as well as the perfect static and dynamic balancing, their operation is completely vibration-tree.The fan-motor assembly has a protective grid against accidental contact with moving parts, which is designed according to lS0 regulations. Fan motors are of the external rotor type, aerodynamically shaped so as not to interfere with the airflow.
