Klimallco high volume/high static duct type Fan Coils are the ideal solution for cooling/heating applications. They are available in 2 versions (single fan/double fan) and a total of 11 models with nominal capacities ranging from 7.1 kW to 91.3 kw in cooling and 16.7kw - 182.5kw in heating depending on the external static pressure and air volumes from 1.440m3/h to 11.600m3/h.
This series is ideal in combination with Klimallco air cooled water chillers or heat pumps for air conditioning oﬁices, shops or any other commercial application, where ﬂoor and wall space is needed for fittings and furniture, allowing various air ﬂow pattern flexibility through ducts according to the room shape and layout.
- Easy access to all the components for maintenance.
- High external static pressure availability (100up to 350Pa).
- RAL9002 powder polyesteric salt spray tested coating for external surfaces available upon request.
- The panels are of double skin type using hot dip galvanized steel with in between thermal and sound insulation of factory injected.
- Fiberglass 20mm thick.
- Centrifugal type fans with double width double inlet and forward curved blades.
- Direct driven motors.
- Standard G2-G3 air filter.
- Low height (380-600mm).
- Insulated drain pan.
- Low operating noise levels.
- 3-speed fan motor.
- A wide selection of optional accessories like additional.
- water heating coil, aluminum filter, 3way valves etc.
These units are large ducted fan coil units, that can be freely configured (according to wished combination) selecting between:
- 2 different motorizations (6-Poli, 4-Poli)
- double skin casing
- 3 water coil types ( 3R; 6R; 3+2R;)
- large range of models
- Huge flexibility